Reduced-Current Digital Ingiter Tester
Those working with explosive devices can have peace of mind with the Alpha 4314 KRC’s redundant fail-safe limiting circuitry that physically prohibits accidental ignition in the event of equipment failure.
7 Test Ranges
Select 4 of 7 test ranges when you order, giving you the ultimate in flexibility no matter what your application
4-Wire Kelvin Inputs
Never worry about lead wire length or contact resistance errors requiring redundant calculations with the Alpha 4314 KRC’s 4-wire Kelvin inputs.
Portable or AC Power
Option AC-115 replaces the battery functionality with continuous isolated AC power.
The Alpha 4314 KRC has been approved by the Department of Defense and all branches of the armed services, including special projects use (i.e. Cruise Missle).
Export Data to PC/Printer/Recorder
You can configure your instrument with a BCD or RS-232 interface which enables the Alpha 4314 KRC to communicate data with other devices.
Ranges, Resolution, and Accuracy
While standard version of the Alpha 4314 KRC features 20, 200, 2k, and 20k Ohm ranges, it can be configured to meet your needs. The table below lists the nine possible ranges that can be installed in the Alpha 4314 KRC. When ordering, simply specify the four range numbers you want to be installed in your instrument. The 20MΩ and 100MΩ ranges are only available on the standard current configuration.
|Rng #||Range||Resolution||Test Current||Fail-Safe Current||Test Current||Fail-Safe Current||Accuracy|
|0||2Ω||100µΩ||10mA||16mA||5mA||8mA||± 0.03% of reading ± 0.02% of range|
|1||20Ω||1mΩ||10mA||16mA||5mA||8mA||± 0.03% of reading ± 0.02% of range|
|2||200Ω||10mΩ||1mA||1.8mA||500μA||1.8mA||± 0.03% of reading ± 0.02% of range|
|3||2kΩ||100mΩ||100μA||180μA||50μA||180μA||± 0.03% of reading ± 0.02% of range|
|4||20kΩ||1Ω||10μA||18μA||5μA||18μA||± 0.03% of reading ± 0.02% of range|
|5||200kΩ||10Ω||1μA||1.8μA||500nA||1.8μA||± 0.05% of reading ± 0.05% of range|
|6||2MΩ||100Ω||100nA||180nA||50nA||180nA||± 1% of reading ± 0.2% of range|
|7||20MΩ||1kΩ||10nA||18nA||n/a||n/a||± 2% of reading ± 0.2% of range|
|8||200MΩ||10kΩ||1nA||1.8nA||n/a||n/a||± 3% of reading ± 1% of range|
|Alpha 4314||Alpha 4314 KRC Reduced|
|General Specifications||Display Type||4 ½ digits LEDs (19999)||Temperature||Temperature Coefficient||±0.002% per °C (from 0°C-15°C and 35°C-50°C)|
|Overload Indication||O.L.||Operating Temp. Range||0°C to 50°C|
|Conversion Rate||3 readings per second||Storage Temp. Range||-10°C to 70°C|
|Terminal Configuration||4-Wire Kelvin||Physical Specifications||Width||9.5” / 24cm|
|Current Source Compl. Voltage||Clamped at 1.6V||Depth||11” / 27cm|
|Power||Power||4 “D” Cell 1.2V recharg. NiMH Batteries 10000mAh||Height||3” / 8cm|
|Battery Charger||6VDC at 300mA nominal||Weight||3 lbs / 1.3kg net; 6lbs / 3kg shipping|
|Accessories||A||Battery Charger 115Vac to 6VDC @ 300mA||Options||RS232||This option provides a safety isolated RS232 Serial interface. The interface provides measurements and other information.|
|HDB||4 Heavy Duty rechargeable NiMH Batteries 1.2V 10000mAH.||BCD||This option provides parallel BCD data on p rear-panel 50-pin connector. All outputs are TTL comparable levels with a drive capability of 1 LS load.|
|CC4||Carrying Case for the meter with room for the battery charger and Lead Sets||AC-115||Continuous Isolated AC Power|
|HCC||Pelican 1500 Hard Carrying Case with Custom Foam for the meter, battery charger, up to 3 sets of leads and extra batteries.||AF-6||100/6|
|R4||Standard 19″ equipment rack adaptor|
RS-232 Serial Interface Capability (NEW)
The interface is isolated to 2.5kV on both power and Data lines and uses iCoupler Technology. Option RS-232 provides a safe way to communicate with the Alpha 4314 KRC via a computer or PLC and allows the transfer of single readings or continuous transmission of data. This interface is for data acquisition only and does not provide range control. See Datasheet for more details.
For applications requiring data output the Alpha 4314 KRC is available with “BCD.” Notice that the BCD Option does not interfere or change the FailSafe feature of the instrument.
AC-115 Continuous Isolated AC Power
Replaces battery pack functionality with continuous isolated AC power.
Battery Charger 110-240VAC to 6VDC @ 1.25A$100
HBD Rechargeable Battery Set$250
CC4 Soft Carrying Case$195
R-4 Rack Mount Adapter$350
Protective Hard Carrying Case$495
4-Wire Kelvin Lead Set$250
Gold-Plated Kelvin Clips (2 Per Set)$150
KK 4-Wire Kelvin Lead Set$350
Jaws Heavy Duty Kelvin Clip Set$150
Shielded 4-Wire Kelvin Lead Set$250
Heavy Duty 6-ft Kelvin Lead Set (Spade Lug to Jaws)$350
4-wire Kelvin Micro-Probes (0.05” Spacing)$350
4-wire Kelvin Mini-Probes (0.18” Spacing)$350
4-wire surface probe (1” dia.)$350
4-wire surface probe (0.5” dia.)$350
Single Pointed Probe Set$350
Banana-To-Banana Lead Set$350