Power Analyzer

2105 Power Analyzer

$3,300

The model 2105 provides accurate, reliable, & low-cost power measurement that enables engineering, production test, and quality assurance departments determine precise product power consumption from DC and AC power sources.

  • Up to 20A/phase Direct (Self Contained Shunt 0.1%)
  • Expandable to 1000 amps (optional, see I-1000 C.T.)
  • True Power Measurements, VI cos Ø
  • High Accuracy Measurement: 0.15% DC to 5KHz
  • Bandwidth~ DC, 40 Hz to 50 KHz
  • Zero to Unity Power Factor Response
  • Accurate Regardless of Waveform Distortion
  • Certificate of N.I.S.T. traceability

Choose Your Level of Service

Our standard 1-year parts & labor warranty is included with every new instrument order and can be extended up to 3 years. For those seeking a higher service level with unlimited repairs, replacements, VIP turnaround, and free Z540.1 annual calibration, add a TrueCare Unlimited Support package to your order instrument tnow, so you'll be fully protected from day one.

12 months of warranty protection covering any factory-originated damage or malfunction. Covers all parts and labor costs.

With Valhalla Scientific’s new TotalCare Unlimited instrument service, you get so much more than a typical warranty. For less than the price of a standalone repair and calibration, you can have unlimited repairs. And replacements. And we’ll even install free component upgrades whenever they’re available. Best of all? You pay one one low price - and only once. For the rest of the year, you can relax knowing your Valhalla Scientific instrument is covered, calibrated, and protected. No matter what.

Total instrument protection including unlimited repairs, replacements, and calibrations.

17025 Certification

Product price: $3,300
Total options:
Order total:
SKU: 2105 Category:

Low Cost Wide Range Power Analyzer

Accurate, Reliable Low-Cost Power Measurements

The Model 2105 provides a fast and convenient method of determining product efficiency, power factor, and true RMS current draw. Phase angle relationships may be calculated through manipulation of the displayed quantities.

The design of these models permits them to make accurate power measurements even in the most difficult applications. Switching mode power supplies, SCR controlled circuits and pulsed DC devices are just a few of the applications requiring the true power measurement capability of the Valhalla 2105 Power Analyzer.  The instrument features dual independent digital displays: the left display provides a continuous indication of true power in watts, while the right display is switch-selectable between amperes (true RMS) or volts (true RMS).

A quick and easy way to connect our load to the 2105 is via the “X-21” Load Extension Cord. Approximately three feet in length for each half, this convenient adaptor cord plugs directly into a standard 115V AC power outlet and mates with the 2105 via heavy duty banana jacks.

Excellent Value Bench-Top Power Analyzer

Rapidly determine product efficiency, power factor, and true RMS current draw.

Featuring dual, independent digital displays, the 2105’s left display provides a continuous indication of true power in watts, while the right display is switch selectable between amperes (true RMS) and volts (true RMS).

Low cost, wide ranges

The 2105 features twin high-resolution 4 1/2 digital displays, DC to 50 kHz frequency response, true power measurement, true RMS voltage and current and built-in peak overload indicators. The 2105 offers 600, 300, 150 and 30 volt ranges and 20, 2 ans 200m amp ranges.

Accurate power measurements in difficult applications

Switching mode power supplies, SCR controlled circuits and pulsed DC devices are just a few of the applications requiring the true power measurement capability of the Valhalla 2105 Power Analyzer.  This benchtop single-phase Wide Range Digital Power Analyzer is fully loaded with measurement features you’d expect on instruments costing three times the price. The Valhalla 2105 power meter is also a great measurement instrument for college and university motor test laboratories.

Crest Factor Response: 50:1 for minimum RMS input, linearly decreasing to 2.5:1 for full-scale RMS input
Minimum Inputs: 5% of voltage and current ranges for specified accuracies
Maximum Voltage Input (without damage): 600VDC or RMS, ±1500VPEAK
Voltage Impedance: 600kΩ
Current Shunt Impedance: 0.01Ω
Max Common Mode: ±1500V peak, neutral to earth
Peak Indicators: Illuminate at 2.5 x full scale for voltage and current
Over-range: 150% of full scale for DC, up to “maximum input” specification
Temperature Coefficient: ±0.025% of range per °C from 0°C-20°C and 30°C-50°C
Source/Load Connections: 4- terminal heavy-duty input jacks
Power Requirements 105-125Vac or 210-250Vac, 50-400Hz; 25VA maximum
Operating Temperature Range 0°C to 50°C; -20°C to 70°C Storage
Humidity 70% RH max @ 40°C (non-condensing)
Dimensions 25cm W x 27cm D x 8cm H (10” W x 10.5” D x 3” H)
Weight 3.5lbs / 1.7kg net
Voltage Range .2000A 2.000A 20.000A
30V 6.000W 60.00W 600.0W
150V 30.00W 300.0W 3000W
300V 60.00W 600.0W 6000W
600V 120.00W 1200.0W 12000W
DC & 40Hz – 5kHz 5kHz – 10kHz  (12A Max) 10kHz – 20kHz. (2A Max)
Voltage:  AC+DC, DC Coupled ±0.1% of rdg ±6 counts ±0.5% of rdg ±0.5% of rng ±1.25% of rdg ±1.75% of rng
Current: AC+DC, DC Coupled ±0.1% of rdg ±6 counts ±0.5% of rdg ±0.5% of rng ±1% of rdg ±1% of rng
Watts:  AC+DC, DC Coupled ±0.25% of rdg ±6 counts ±0.5% of rdg ±0.5% of rng ±1% of rdg ±1% of rng

 

Instrument Accessories

Maximize Your Instrument’s Performance with Certified-Compatible Cables, Leads, Connectors, & More

We recommend the accessories below for your instrument.  Each has been specifically designed and configured for top performance with our precision instruments.

Documents & Downloads

Here you can download the documentation relevant to your instrument. This section will be continually updated as more media is added (tutorials, demos, etc).

Manual and Specifications

What’s Included

All instrument orders include the following:

13-Month Comprehensive Instrument Warranty

All pre-paid orders include 13-month instrument warranty that covers component and labor costs in the event of needed repair or recalibration.

Certificate of Calibration

A fully-documented NIST-traceable Z540 certificate of calibration is included with your instrument.

Unlimited Phone & Email Support

Our engineering, sales, and customer support teams are always available to answer questions, walk you through particular product features, and assist with any issue that may arise.

Required Power Supply/Battery Pack

Unless you select a different option, every instrument ships with the cables and power supplies required to operate.

All Instrument Documentation

Includes user manual, calibration procedures, specifications, and any relevant materials.

Quick Contact

Use this form to quickly configure and request a formal quote from our sales department. You may always reach us at 800-548-9806 if you'd like immediate assistance.
  • This field is for validation purposes and should be left unchanged.

Related products