2400 Series Wideband Spectrum Power Analyzer

$6,995.00$12,895.00

Precision Measurements for Any Waveform - Wattmeter, oscilloscope, and power spectrum analyzer

High-performance precision in both single and three-phases: a wattmeter, oscilloscope, and power spectrum analyzer in one. The 2400 power analyzer measures, computes and displays critical power variables so you can concentrate on more efficient & reliable testing.  The 2400 Series provides simultaneous, precise voltage and current measurements while monitoring and displaying the power parameters you need in the format that best fits your application.

Extraordinary Features

  • The analyzer inputs are all galvanically isolated.
  • Broad band DC-300kHz.
  • Wide input range (0.3V – 1000V, 15mA – 40A).
  • Exceptional common mode rejection for use in frequency inverter driven systems.
  • The accuracy is 0.1% (0.05% versions are available).
  • The bright LCD monitor displays up to 10 measured values in well legible 9mm high numbers.
  • The Three-Phase Power Analyzer puts up to 32 measured values on the screen.

 

Voltage
8 ranges: 0.3 V, 1 V, 3 V, 10 V, 30 V, 100 V, 300 V, 1000 V
Frequency range DC, 0.1 Hz – 1 MHz
Crest Factor 3:1 at 50 % full scale (fs)
Input Impedance 1 MOhm
Common Mode 50 Hz/100 kHz 160 dB/100 dB
Standard accuracy 23°C; rms, mean, rectified mean; 0.3V typical Improved accuracy
±(0.05 % rdg + 0.07 % range)
1 Hz-1 kHz                           ±(0.1 % rdg +0.1 % range)
DC, 1 kHz-10 kHz                     ±(0.2 % rdg +0.2 % range)
10 kHz-100 kHz                       ±(0.3 %/ range + 0.04 % /kHz rdg)
100 kHz-300 kHz                      ±(0.3 %/  range + 0.04 % /kHz rdg), typical
Current
13 ranges: 1.5 mA, 5 mA, 15 mA, 50 mA, 150 mA, 500 mA, 1.5 A, 5 A; 1, 3, 10, 30, 100 A Max. 1 A, 5 A, 30 A, resp.
Frequency range DC, 0.1 Hz-300 kHz / 1 MHz
Crest Factor 3:1 at 50 % full scale (fs)
Common Mode 50 Hz/100 kHz 160 dB/120 dB
Standard accuracy 23°C; 1 A-, 5 A-, shunt input               30 A input Lowest ranges 1.5 mA, 15 mA,
1 Hz-1 kHz                ±(0.1 % rdg + 0.1 % rng)                  ±(0.1 % rdg + 0.1 % rng)DC, 1 kHz-10 kHz     ±(0.2 % rdg + 0.2 % rng)                  ±(0.7 % rdg + 0.2 % rng)10 kHz-100 kHz        ±(0.3 % range + 0.04 %/kHz rdg)     ±(0.3 % rng + 0.5 %/kHz rdg), typ100 kHz-300 kHz      ±(0.3 % range + 0.04 %/kHz rdg), typical 1 A: typical.
Improved accuracy 1Hz-400 Hz
±(0.05 % rdg + 0.07 % range)
Power
104 ranges corresponding to the products V x A.
Frequency range DC, 0.1 Hz-300 kHz
45 Hz-65 Hz PF= 0 to ±0.1 PF= 0 to ±1 PF= 0 to ±1 PF=1
1 Hz-1 kHz
DC, 1 kHz-10 kHz 10 kHz-100 kHz(0.1 % rdg + 0.01 % range)
Add accuracy percentage figures of current and voltage,
+0.04 %/kHz PF
Frequency
0.1 Hz-400 kHz, V triggered; Accuracy ±0.1 %.
Computed Values Accuracy; Reactive Power, Var=±(VA2-W2)1/2, Apparent Power: VA=Arms Vrms; Power Factor: PF=W/VA; Crest Factor: CF=Ap/Arms, Vp/Vrms: Form Factor: FF=At/Arms, Vt/Vrms; Impedance: Z=Vrms/Arms; Total Harm Dist: THD=(Irms2- Ifund2)1/2/Irms

 

 

Add accuracy percentage figures of values involved in computation.
Integrator Energy, Charge; Accuracy Wh, Vah, Varh, Ah; Basic accuracy of integrated quantity.
Harmonic Analysis Frequency range of fundamental            2.5 Hz-100 kHz
Range of harmonic 1-99
Accuracy, Harmonic current and voltage
2 Hz-1 kHz              ±(0.1 % rdg + 0.1 % range) 1 kHz-10 kHz          ±(0.5 % rdg + 0.5 % range)
10 kHz.-100 kHz     ±(0.7 % range + 0.1 %/kHz rdg), typical
Display Blue liquid crystal graphic display with FL backlight               64×120 mm;  128 x 240 pixels

 

 

Power AC, 50-400 Hz; Fuse: Power

 

 

85 V-240 V; 2 A, 15 VA
Dieletric Strength Inputs to case or power supply Line input to case
Input to Input
2.5 kV/50 Hz/1 minute
1.5 kV/50 Hz/ 1 minute 4 kV/50 Hz/1 minute
Dimension H x W x D; Weight 150 x 235 x 320 mm; 4 kg
Options IEEE-488-2, RS232, Centronics printer output
4 programmable analog outputs; single-, sum-, or average values 4 analog inputs 0-±5V, input impedance 200 kΩ
4 analog inputs, 0-±10 V, input impedance 200 kΩ Rack Mounting Kit
Windows Operating Software 95, 98, 2000, NT, XP; transformer-motor testing
0-±5 V, accuracy 0.2 % 0-±5 V, accuracy 0.2 % 0-±10 V accuracy 0.2 %
1.5mA-1A Inp/ Shunt Input 1 A input Hi against ILo Shunt Hi                   Shunt Lo 1 A input,    mA:     1.5, 5, 15, 50, 150, 500, 1500
Shunt input, mV:    60, 60Ö10, 600, 600VÖ10, 6000, 6000Ö10
Input impedance:   60k
1 A input: set scaling to 0.1 Shunt input: 60 mV corresponds to 1.0000 A
SKU: 2400 Categories: ,

6 CONFIGURATIONS AVAILABLE

1-Phase 1-Phase 1-Phase 3-Phase 3-Phase 3-Phase
No Harmonics Harmonics Analysis Harmonics Analysis No Harmonics Harmonics Analysis Harmonics Analysis
0.1% Accuracy 0.1% Accuracy 0.05% Accuracy 0.1% Accuracy 0.1% Accuracy 0.05% Accuracy
2410-1HS 2410-1HE 2430-3S 2430-3HS 2430-3HE

CALCULATED VALUES

Current/Voltage

  • RMS
  • RM
  • Peak
  • Harmonics

General

  • Frequency
  • Harmonic Distortion
  • Crest Factor
  • Form Factor
  • Oscilloscope Display

Integrated

  • Watt-Hours
  • VA-Hours
  • Amp-Hours

Power

  • Watts
  • VA
  • VAR
  • Power Factor

Certificate of Calibration Included

An NIST-traceable Z540.3 certificate of calibration is included with every instrument order.  Furthermore, enhanced ISO/IEC 17025 certification is available.

2400 Series Variations
RS-232 Interface and Centronics printer output including Windows Operating SoftwareRS-232 Interface and Centronics printer output including Windows Operating Software

RS-232 Interface and Centronics printer output including Windows Operating SoftwareRS-232 Interface and Centronics printer output including Windows Operating Software

USB Interface and Centronics printer output including Windows Operating Software

USB Interface and Centronics printer output including Windows Operating SoftwareUSB Interface and Centronics printer output including Windows Operating Software

RS-232- and IEEE-488 Interface, Centronics printer output including Windows™ software to control, read, and store dataRS-232- and IEEE-488 Interface, Centronics printer output including Windows™ software to control, read, and store data

RS-232- and IEEE-488 Interface, Centronics printer output including Windows™ software to control, read, and store data

USB and IEEE-488 Interface, Centronics printer output including Windows Operating Software

USB and IEEE-488 Interface, Centronics printer output including Windows Operating Software

Ethernet and IEEE-488 Interface, Centronics printer output including Windows Operating Software

Ethernet and IEEE-488 Interface, Centronics printer output including Windows Operating Software

RS-232- and IEEE-488 Interface, Centronics printer output, and 4 analog outputs, 8 analog inputs including Windows™ software to control, read, and store data, read analog inputs

RS-232- and IEEE-488 Interface, Centronics printer output, and 4 analog outputs, 8 analog inputs including Windows™ software to control, read, and store data, read analog inputs

RS-232 and IEEE-488 Interface, Centronics printer output 4 analog outputs with provision to also output total power, 8 analog inputs including Windows™ software to control, read, and store data, read analog inputs

RS-232 and IEEE-488 Interface, Centronics printer output 4 analog outputs with provision to also output total power, 8 analog inputs including Windows™ software to control, read, and store data, read analog inputs

RS-232 and IEEE-488 Interface, Centronics printer output, 4 programmable analog outputs, and 8 analog inputs. Includes Windows Operating Software.

RS-232 and IEEE-488 Interface, Centronics printer output, 4 programmable analog outputs, and 8 analog inputs. Includes Windows Operating Software.

2400 Series Options

Three-Phase current sensor model 0-100A

Three-Phase current sensor model 0-100A

Three-phase current sensor model 0-200A

Three-phase current sensor model 0-200A

2400 Series Software for Motor Testing

2400 Series Software for Motor Testing

2400 Series Software for Transformer Testing

2400 Series Software for Transformer Testing

TTL input for external synchronization

TTL input for external synchronization

Network to form Artificial Neutral. Mainly Frequency Inverter Measurements.

Network to form Artificial Neutral. Mainly Frequency Inverter Measurements.

0-300A, 0-3000A Flexible Current Clamps with Connector to Clamp Input of Power Analyzer. One per Phase. 1% 50/60Hz.

0-300A, 0-3000A Flexible Current Clamps with Connector to Clamp Input of Power Analyzer. One per Phase. 1% 50/60Hz.

17025 Certification is performed on our behalf by a third party. Please contact us for additional information

17025 Certification is performed on our behalf by a third party. Please contact us for additional information
Product price: $6,995.00
Total options:
Order total: