2400 Series Wideband Spectrum Power Analyzer
$6,995.00 – $12,895.00
Precision Measurements for Any Waveform - Wattmeter, oscilloscope, and power spectrum analyzer
High-performance precision in both single and three-phases: a wattmeter, oscilloscope, and power spectrum analyzer in one. The 2400 power analyzer measures, computes and displays critical power variables so you can concentrate on more efficient & reliable testing. The 2400 Series provides simultaneous, precise voltage and current measurements while monitoring and displaying the power parameters you need in the format that best fits your application.
Extraordinary Features
- The analyzer inputs are all galvanically isolated.
- Broad band DC-300kHz.
- Wide input range (0.3V – 1000V, 15mA – 40A).
- Exceptional common mode rejection for use in frequency inverter driven systems.
- The accuracy is 0.1% (0.05% versions are available).
- The bright LCD monitor displays up to 10 measured values in well legible 9mm high numbers.
- The Three-Phase Power Analyzer puts up to 32 measured values on the screen.
| Voltage | ||||
| 8 ranges: 0.3 V, 1 V, 3 V, 10 V, 30 V, 100 V, 300 V, 1000 V | ||||
| Frequency range | DC, 0.1 Hz – 1 MHz | |||
| Crest Factor | 3:1 at 50 % full scale (fs) | |||
| Input Impedance | 1 MOhm | |||
| Common Mode | 50 Hz/100 kHz | 160 dB/100 dB | ||
| Standard accuracy 23°C; rms, mean, rectified mean; 0.3V typical | Improved accuracy | |||
| ±(0.05 % rdg + 0.07 % range) | ||||
| 1 Hz-1 kHz                           ±(0.1 % rdg +0.1 % range) | ||||
| DC, 1 kHz-10 kHz                    ±(0.2 % rdg +0.2 % range) | ||||
| 10 kHz-100 kHz                       ±(0.3 %/ range + 0.04 % /kHz rdg) | ||||
| 100 kHz-300 kHz                     ±(0.3 %/ range + 0.04 % /kHz rdg), typical | ||||
| Current | ||||
| 13 ranges: 1.5 mA, 5 mA, 15 mA, 50 mA, 150 mA, 500 mA, 1.5 A, 5 A; 1, 3, 10, 30, 100 A | Max. 1 A, 5 A, 30 A, resp. | |||
| Frequency range | DC, 0.1 Hz-300 kHz / 1 MHz | |||
| Crest Factor | 3:1 at 50 % full scale (fs) | |||
| Common Mode | 50 Hz/100 kHz | 160 dB/120 dB | ||
| Standard accuracy 23°C; 1 A-, 5 A-, shunt input              30 A input | Lowest ranges 1.5 mA, 15 mA, | |||
| 1 Hz-1 kHz               ±(0.1 % rdg + 0.1 % rng)                 ±(0.1 % rdg + 0.1 % rng)DC, 1 kHz-10 kHz    ±(0.2 % rdg + 0.2 % rng)                 ±(0.7 % rdg + 0.2 % rng)10 kHz-100 kHz       ±(0.3 % range + 0.04 %/kHz rdg)    ±(0.3 % rng + 0.5 %/kHz rdg), typ100 kHz-300 kHz     ±(0.3 % range + 0.04 %/kHz rdg), typical | 1 A: typical. | |||
| Improved accuracy 1Hz-400 Hz | ||||
| ±(0.05 % rdg + 0.07 % range) | ||||
| Power | ||||
| 104 ranges corresponding to the products V x A. | ||||
| Frequency range | DC, 0.1 Hz-300 kHz | |||
| 45 Hz-65 Hz | PF= 0 to ±0.1 PF= 0 to ±1 PF= 0 to ±1 PF=1 | |||
| 1 Hz-1 kHz | ||||
| DC, 1 kHz-10 kHz 10 kHz-100 kHz(0.1 % rdg + 0.01 % range) | ||||
| Add accuracy percentage figures of current and voltage, | ||||
| +0.04 %/kHz PF | ||||
| Frequency | ||||
| 0.1 Hz-400 kHz, V triggered; Accuracy ±0.1 %. | ||||
| Computed Values | Accuracy; Reactive Power, Var=±(VA2-W2)1/2, Apparent Power: VA=Arms Vrms; Power Factor: PF=W/VA; Crest Factor: CF=Ap/Arms, Vp/Vrms: Form Factor: FF=At/Arms, Vt/Vrms; Impedance: Z=Vrms/Arms; Total Harm Dist: THD=(Irms2- Ifund2)1/2/Irms
|
Add accuracy percentage figures of values involved in computation. | |||
| Integrator | Energy, Charge; Accuracy | Wh, Vah, Varh, Ah; Basic accuracy of integrated quantity. | |||
| Harmonic Analysis | Frequency range of fundamental           2.5 Hz-100 kHz | ||||
| Range of harmonic | 1-99 | ||||
| Accuracy, Harmonic current and voltage 2 Hz-1 kHz             ±(0.1 % rdg + 0.1 % range) 1 kHz-10 kHz         ±(0.5 % rdg + 0.5 % range) 10 kHz.-100 kHz    ±(0.7 % range + 0.1 %/kHz rdg), typical |
|||||
| Display | Blue liquid crystal graphic display with FL backlight              64×120 mm; 128 x 240 pixels
|
||||
| Power | AC, 50-400 Hz; Fuse: Power
|
85 V-240 V; 2 A, 15 VA | |||
| Dieletric Strength | Inputs to case or power supply Line input to case Input to Input |
2.5 kV/50 Hz/1 minute 1.5 kV/50 Hz/ 1 minute 4 kV/50 Hz/1 minute |
|||
| Dimension | H x W x D; Weight | 150 x 235 x 320 mm; 4 kg | |||
| Options | IEEE-488-2, RS232, Centronics printer output 4 programmable analog outputs; single-, sum-, or average values 4 analog inputs 0-±5V, input impedance 200 kΩ 4 analog inputs, 0-±10 V, input impedance 200 kΩ Rack Mounting Kit Windows Operating Software 95, 98, 2000, NT, XP; transformer-motor testing |
0-±5 V, accuracy 0.2 % 0-±5 V, accuracy 0.2 % 0-±10 V accuracy 0.2 % | |||
| 1.5mA-1A Inp/ Shunt Input | 1 A input Hi against ILo Shunt Hi                  Shunt Lo | 1 A input,   mA:    1.5, 5, 15, 50, 150, 500, 1500 Shunt input, mV:   60, 60Ö10, 600, 600VÖ10, 6000, 6000Ö10 Input impedance:  60k |
1 A input: set scaling to 0.1 Shunt input: 60 mV corresponds to 1.0000 A | ||
Current/Voltage
- RMS
- RM
- Peak
- Harmonics
General
- Frequency
- Harmonic Distortion
- Crest Factor
- Form Factor
- Oscilloscope Display
Integrated
- Watt-Hours
- VA-Hours
- Amp-Hours
Power
- Watts
- VA
- VAR
- Power Factor
Certificate of Calibration Included
An NIST-traceable Z540.1 certificate of calibration is included with every instrument order. Â Furthermore, enhanced ISO/IEC 17025 certification is available.
