4300C Programmable Micro-Ohmmeter

$4,995

For rapid testing of inductive loads, the 4300C’s charge inductor mode provides in excess of 20V compliance. This model reduces settling time by a factor of 5:1 on inductive loads. The result is valid readings in minutes instead of hours when testing 400MW utility transformers. A solid-state “Crowbar” design provides front end protection for up to 500 amps of induced current.

The 4300C Digital Micro-Ohmmeter measures a variety of low-resistance devices ranging in value from 100nΩ to 20kΩ. The flexible measurement format of the 4300C provides six ranges of user selectable test current (from .1mA to 10A) and three voltage sensitivity settings (20mV, 200mV and 2V). The unit’s 4½ digit resistance readings are displayed on a high contrast LCD display and are optionally available via optional BCD, RS-232 or GPIB interface.

  • Test Current to 10 Amps
  • High Compliance Voltage
  • Temperature Compensation Mode (TCM)
  • On/Off Control of Test Current
  • 4-Wire Kelvin
  • Measurement Ranges from 2mΩ to 30kΩ
  • 3 Selectable Pre-Amp Ranges
  • 6 Selectable Test Current Ranges
  • VFD Display w/Adjustable Intensity
  • Hi-LO Resistance Limit Comparator
  • Printout/Log Function
  • Run/Hold w/Peak Detector
  • GPIB-USB-BCD

Primary Interface

+ $495
+ $495
+ $1,495

4300C Configure Options

+ $1,495

Add IEEE TL-488 GPIB Interface

+ $125

Add rear locking connectors to limit movement & modification

+ $350

19-inch Rack Mount adapterds

Product price
Additional options total:
Order total:

Performance That Conquers Any Resistance

4300C Programmable Digital Micro-Ohmmeter

Features of the 4300C include four terminal compensation, a very low 2mΩ range, selectable test current levels (up to 10 amps), a fast-settling charge inductor mode, safety disconnect status indicators, automatic temperature compensation, a basic accuracy of ±0.03% and a push button or GPIB controlled current on/off selector.

Extraordinary Features

  • User-selectable test-current up to 10A
  • Boosted compliance voltage mode for rapid charging of motors and transformers
  • “Safe to Disconnect” status indicators
  • Test-current “On/Off” switch
  • Selectable voltage sensitivity – 1μV, 10μV, 100μV
  • 18 voltage sense/current combination provide optimal measurement conditions
  • Selectable display refresh (100ms-to-500ms) with variable intensity
  • RS-232 serial interface
  • Programmable-automatic temperature compensation
  • Built-in limit comparator with visual-acoustic indications and rear panel relay terminals
  • Run/Hold w/Peak Detector
  • Print/Log Function

Transformers, Motors, Cables, and More

The 4300C is the perfect instrument for tackling ultra-low resistance testing requirements associated with motors, transformers, fuses, connectors, breakers, bonding/weld resistance, and many other applications. For rapid testing of inductive loads the 4300C’s charge inductor mode provides in excess of 20V compliance. This model reduces the settling time by a factor of 5:1 on inductive loads. The result is valid readings in minutes instead of hours when testing 400MW utility transformers. A solid-state “Crowbar” design provides front-end protection for up to 500 amps of induced current.

Automatic Temperature Compensation

Copper and aluminum will exhibit approximately a 0.4% change in resistance for a 1°C change in ambient temperature. When in Automatic Temperature Compensation mode (TCM), the Valhalla 4300C temperature sensor automatically senses the ambient temperature and references the resistance value of the test item equivalent to being in a 20° C controlled environment. A 10° C change in ambient (i.e. open air, shop floor) provides a 4% change in the resistance of a copper item. Without this “TCM” feature, a micro-ohmmeter which may be 0.02% accurate may be making a 5-10% resistance measurement error when measuring copper or aluminum (i.e., transformer wire) material.

Virtually all competitive micro-ohmmeters lack copper or aluminum (TCM) ambient temperature coefficient of resistivity compensation. Ambient temperature can have drastic effect on the resistivity of a conductor. Without temperature compensation, materials can easily be erroneously classified during the resistance testing process. Correcting the resistance measurement on copper conductors, while ambient temperature varies makes “TCM” a very useful feature.

Large Inductor Resistance Measurement

The 4300C’s 10A current source is ideal for low resistance inductors such as utility transformers. Combining the current output with boosted compliance voltage (>20 VDC) enables rapid stable resistance readings in seconds, not hours. Having unique features like Automatic Temperature Compensation, High Level Current Sourcing (10A) with High Compliance Drive circuitry and 18 combinations of Voltage / Current Range Selectivity, the 4300C Digital Micro-ohmmeter is second to none.

Charging Inductor Mode Indicator

The Valhalla 4300C charging inductor mode LED, indicates when the unit’s current source compliance voltage is exceeded. The 4300C “Boost Mode” then increases the compliance voltage to exceed 20V output to reduce the settling time (charges the inductance) when inductive loads (i.e. large transformers) are being measured.

#
Range
Test Voltage
Full Scale
Resolution
Test Current
Accuracy
(± % reading ± Ω)
Temperature Coefficient
TCM Mode Accuracy
(± % reading ± % ΔT)
1 2mΩ 20mV 2.0000mΩ 100nΩ 10A ± .06 ± .0006m ±50ppm/°C ± .11 ± .0006m
2 20mΩ 20mV 20.000mΩ 1µΩ 1A ± .04 ± .006m ±50ppm/°C ± .09 ± .006m
3 200mΩ 20mV 200.00mΩ 10µΩ 0.1A ± .04 ± .06m ±50ppm/°C ± .09 ± .06m
4 2Ω 20mV 2.0000Ω 100µΩ 10mA ± .04 ± .0006 ±50ppm/°C ± .09 ± .0006
5 20Ω 20mV 20.000Ω 1mΩ 1mA ± .04 ± .006 ±50ppm/°C ± .09 ± .006
6 200Ω 20mV 200.00Ω 10mΩ 0.1mA ± .04 ± .06 ±50ppm/°C ± .09 ± .06
7 20mΩ 200mV 20.000mΩ 1µΩ 10A ± .06 ± .003m ±50ppm/°C ± .11 ± .003m
8 200mΩ 200mV 200.00mΩ 10µΩ 1A ± .04 ± .03m ±50ppm/°C ± .09 ± .03m
9 2Ω 200mV 2.0000Ω 100µΩ 0.1A ± .04 ± .0003 ±50ppm/°C ± .09 ± .0003
10 20Ω 200mV 20.000Ω 1mΩ 10mA ± .04 ± .003 ±50ppm/°C ± .09 ± .003
11 200Ω 200mV 200.00Ω 10mΩ 1mA ± .04 ± .03 ±50ppm/°C ± .09 ± .03
12 2kΩ 200mV 2.0000kΩ 100mΩ 0.1mA ± .04 ± .0003k ±50ppm/°C  ± .09 ± .0003k
13 200mΩ 2V 200.00mΩ 10µΩ 10A ± .06 ± .03m ±50ppm/°C ± .11 ± .03m
14 2Ω 2V 2.0000Ω 100µΩ 1A ± .04 ± .0003 ±50ppm/°C ± .09 ± .0003
15 20Ω 2V 20.000Ω 1mΩ 0.1A ± .04 ± .003 ±50ppm/°C ± .09 ± .003
16 200Ω 2V 200.00Ω 10mΩ 10mA ± .04 ± .03 ±50ppm/°C ± .09 ± .03
17 2kΩ 2V 2.0000kΩ 100mΩ 1mA ± .04 ± .0003k ±50ppm/°C  ± .09 ± .0003k
18 20kΩ 2V 20.000kΩ 1Ω 0.1mA ± .04 ± .003k ±50ppm/°C ± .09 ± .003k

Other Features

The Model 4300C can also be programmed for Hi-Lo limit comparison. Three front panel LEDs allow a visual of the result and a rear panel relay closure screw terminal block can be used to implement an automated batch sorting system for components or products, operate counters, sound alarms or shut off a process. A Run/Hold function is also a standard feature of the 4300C. The user can program this function as a peak hi or peak low detector. Measurements may be printed or logged and viewed in a spread sheet by using the Print/Log feature also standard with the Model 4300C.

General Specifications
Display Type:  5 digit VFD
Overload Indication: Flashes OVERLOAD
Conversion Rate: 45 readings per second
Terminal Configuration: 4-Wire Kelvin
Max Kick-Back Protection: 500A Peak Induced Current
Compl. Voltage (Normal Mode): 7.5 VDC Nominal @ 10A resistive
Compl. Voltage (Charging Inductor Mode): 20 VDC when indicator is on
Test Current Polarity: Positive (flows High to Low)
Open Circuit Voltage (Test Current Off): < 20mV
Power
Power Requirements: 115VAC or 230VAC ±10%
Temperature
Operating Temp. Range: 0°C to 50°C
Storage Temp. Range: -40°C to 85°C
Humidity: 80% RH max @ 40°C (non-condensing)
Physical Specifications
Width|Depth|Height:  17” / 43cm | 11.5” / 29.5cm | 4” /10cm
Weight: 20lbs / 9 kg net;
# Range Test Voltage Full Scale Resolution Test Current1 Accuracy2 (± % reading ± Ω) Temperature Coefficient3 TCM Mode Accuracy4 (± % reading ± % ΔT)
  1. Current source is ±1% absolute accuracy
  2. Accuracy specs are valid following a 30 minute warm-up at an ambient temperature between 22°C and 28°C, and include the effects of line voltage variations within the allowed range.
  3. Temp. Coefficient specified for temp. ranges from 5°C to 21°C and 29°C to 50°C.
  4. Accuracy specifications valid following a 30 minute warm-up at an ambient temperature between 21°C and 29°C.
1 2mΩ 20mV 2.0000mΩ 100nΩ 10A ± .06 ± .0006m ±50ppm/°C ± .11 ± .0006m
2 20mΩ 20mV 20.000mΩ 1µΩ 1A ± .04 ± .006m ±50ppm/°C ± .09 ± .006m
3 200mΩ 20mV 200.00mΩ 10µΩ 0.1A ± .04 ± .06m ±50ppm/°C ± .09 ± .06m
4 2Ω 20mV 2.0000Ω 100µΩ 10mA ± .04 ± .0006 ±50ppm/°C ± .09 ± .0006
5 20Ω 20mV 20.000Ω 1mΩ 1mA ± .04 ± .006 ±50ppm/°C ± .09 ± .006
6 200Ω 20mV 200.00Ω 10mΩ 0.1mA ± .04 ± .06 ±50ppm/°C ± .09 ± .06
7 20mΩ 200mV 20.000mΩ 1µΩ 10A ± .06 ± .003m ±50ppm/°C ± .11 ± .003m
8 200mΩ 200mV 200.00mΩ 10µΩ 1A ± .04 ± .03m ±50ppm/°C ± .09 ± .03m
9 2Ω 200mV 2.0000Ω 100µΩ 0.1A ± .04 ± .0003 ±50ppm/°C ± .09 ± .0003
10 20Ω 200mV 20.000Ω 1mΩ 10mA ± .04 ± .003 ±50ppm/°C ± .09 ± .003
11 200Ω 200mV 200.00Ω 10mΩ 1mA ± .04 ± .03 ±50ppm/°C ± .09 ± .03
12 2kΩ 200mV 2.0000kΩ 100mΩ 0.1mA ± .04 ± .0003k ±50ppm/°C  ± .09 ± .0003k
13 200mΩ 2V 200.00mΩ 10µΩ 10A ± .06 ± .03m ±50ppm/°C ± .11 ± .03m
14 2Ω 2V 2.0000Ω 100µΩ 1A ± .04 ± .0003 ±50ppm/°C ± .09 ± .0003
15 20Ω 2V 20.000Ω 1mΩ 0.1A ± .04 ± .003 ±50ppm/°C ± .09 ± .003
16 200Ω 2V 200.00Ω 10mΩ 10mA ± .04 ± .03 ±50ppm/°C ± .09 ± .03
17 2kΩ 2V 2.0000kΩ 100mΩ 1mA ± .04 ± .0003k ±50ppm/°C  ± .09 ± .0003k
18 20kΩ 2V 20.000kΩ 1Ω 0.1mA ± .04 ± .003k ±50ppm/°C ± .09 ± .003k

 

Instrument Accessories

Maximize Your Instrument’s Performance with Certified-Compatible Cables, Leads, Connectors, & More

We recommend the accessories below for your instrument.  Each has been specifically designed and configured for top performance with our precision instruments.

Documents & Downloads

Here you can download the documentation relevant to your instrument. This section will be continually updated as more media is added (tutorials, demos, etc).

Manual and Specifications

What’s Included

All instrument orders include the following:

13-Month Comprehensive Instrument Warranty

All pre-paid orders include 13-month instrument warranty that covers component and labor costs in the event of needed repair or recalibration.

Certificate of Calibration

A fully-documented NIST-traceable Z540 certificate of calibration is included with your instrument.

Unlimited Phone & Email Support

Our engineering, sales, and customer support teams are always available to answer questions, walk you through particular product features, and assist with any issue that may arise.

Required Power Supply/Battery Pack

Unless you select a different option, every instrument ships with the cables and power supplies required to operate.

All Instrument Documentation

Includes user manual, calibration procedures, specifications, and any relevant materials.